This product represents a refined configuration of automated livestock care equipment, specifically designed for efficient and consistent dairy extraction. It builds upon established milking technology, incorporating enhancements focused on optimizing yield and minimizing stress on the animals. An instance of its application would be the scheduled, automated collection of milk from a herd of dairy cows within a large-scale agricultural operation.
Its significance lies in its potential to reduce labor costs, improve milk quality through consistent procedures, and enhance the overall welfare of the animals by providing a more comfortable and predictable milking experience. Historically, advancements in milking technology have correlated directly with increases in dairy production efficiency, and this represents a continuation of that trend, aiming for increased automation and control.
The following sections will delve into specific features, operational aspects, and economic implications of this advanced system, examining its contributions to modern dairy farming practices and its potential for future development.
1. Automated Extraction
Automated extraction is not merely a feature; it forms the very heart of the envisioned system. It represents a departure from the reliance on manual labor, where consistency could vary depending on the operator’s skill and fatigue. Instead, this functionality employs precision robotics and sensor technology to replicate the optimal milking process, ensuring a uniform approach across the entire herd. In essence, the automated extraction system within it is designed to alleviate the inherent inconsistencies associated with manual milking practices.
The cause-and-effect relationship is straightforward: the implementation of automated extraction leads to a predictable and stable milking regime. For instance, a dairy farm previously struggling with inconsistent milk yields due to varying milking techniques observed a marked increase in overall production and quality after integrating this automated system. This system’s implementation is designed to optimize the milk extraction process, thereby directly influencing both the volume and quality of milk produced, showcasing its pivotal role in enhancing efficiency and profitability in dairy farming operations.
Challenges remain, such as the initial investment cost and the need for specialized training to maintain the robotic components. However, the long-term benefits reduced labor dependence, enhanced milk quality, and improved animal welfare offer a compelling argument for its adoption. The evolution of dairy farming is inextricably linked to the continuous integration of technological advancements, and this is positioned as a significant step in that ongoing progression, highlighting the importance of the system’s design for the future of dairy operations.
2. Yield Optimization
The promise of increased productivity has always driven agricultural innovation. In the context of dairy farming and, specifically, this technology, the pursuit of Yield Optimization is not merely about extracting more milk. It is about doing so efficiently, sustainably, and with careful consideration for the well-being of the herd. This system is designed as a holistic approach to maximize milk output while minimizing resource expenditure and animal stress.
-
Precision Milking Parameters
The heart of yield optimization lies in the meticulous control of milking parameters. This system monitors and adjusts vacuum levels, pulsation rates, and milking durations for each individual animal. Consider a scenario where a cow with a sensitive udder requires a gentler milking process. The technology automatically adapts, preventing discomfort and potential injury, thereby ensuring consistent milk output over the long term. Without precise adjustments, sub-optimal milking conditions can lead to reduced milk production and potential health issues, ultimately hindering yield optimization efforts.
-
Real-time Data Analysis
Data is the lifeblood of yield optimization. This provides real-time insights into milk flow rates, somatic cell counts, and other critical indicators. A farmer can leverage this information to identify underperforming animals or potential health concerns early on. For example, a sudden drop in milk production for a particular cow might signal an impending infection. Early detection allows for timely intervention, preventing a significant decline in overall herd productivity. The absence of such data-driven insights leaves farmers to rely on less accurate, often delayed indicators, hindering their ability to proactively manage their herd and optimize yield.
-
Optimized Milking Schedules
The timing and frequency of milking sessions profoundly impact milk yield. This allows for the creation of customized milking schedules based on individual cow characteristics and production levels. For instance, high-producing cows might benefit from more frequent milking sessions, while others may thrive on a less intensive schedule. By tailoring milking schedules to the specific needs of each animal, ensures that each cow reaches its full production potential. A one-size-fits-all approach to milking schedules can lead to over-milking or under-milking, both of which negatively impact yield and animal welfare.
-
Automated Udder Health Monitoring
Udder health is paramount for sustained milk production. This system incorporates automated sensors to detect subtle changes in udder temperature, swelling, or milk composition, potentially indicating the onset of mastitis or other udder infections. Early detection and treatment of these conditions prevent significant reductions in milk yield and the potential spread of infection within the herd. Without proactive udder health monitoring, infections can go unnoticed until they manifest as severe problems, leading to substantial losses in milk production and the need for costly veterinary intervention.
These facets, interwoven within the framework of this technology, contribute to a paradigm shift in dairy farming. No longer is yield optimization solely reliant on manual labor and guesswork. Instead, it becomes a data-driven, precisely controlled process that maximizes milk output while prioritizing animal well-being. Consider the implications for a small-scale dairy farm striving to compete with larger operations. Through this technology, it gains access to tools and insights previously unavailable, leveling the playing field and paving the way for a more sustainable and profitable future.
3. Animal Welfare
The concept of Animal Welfare transcends mere humane treatment; it becomes an integral element of operational efficiency and sustainable dairy farming when coupled with technological advancements like this. Consider a dairy farm where cows roam freely, yet, during milking, experience discomfort due to inconsistent machine settings. Such inconsistencies, often unavoidable in manual milking or outdated systems, can cause undue stress, affecting milk production and, in the long run, their overall health. This system seeks to mitigate this by providing a consistently gentle and efficient milking process, tailored to each animal’s needs.
A crucial aspect of this systems contribution to animal welfare lies in its design. By incorporating sensors that detect individual cow characteristics, the system automatically adjusts milking parameters, minimizing discomfort. For example, if a cow exhibits signs of sensitivity, the machine responds, reducing vacuum pressure and adjusting pulsation rates. This personalized approach contrasts sharply with conventional methods, where settings are often generalized, potentially leading to pain or injury for some animals. The systems ability to monitor milk flow and detect anomalies also plays a vital role. A sudden drop in milk production, for instance, could indicate an infection, triggering an alert for prompt veterinary intervention. This proactive approach not only prevents the condition from worsening but also reduces the animal’s suffering and promotes quicker recovery.
The practical implications of integrating this technology extend beyond individual animal care. It fosters a culture of proactive health management within the dairy farm. The system’s data-driven insights allow farmers to identify and address potential welfare issues before they escalate, promoting a healthier and happier herd. However, challenges remain, including the initial cost of implementation and the need for ongoing maintenance. Despite these hurdles, the benefits of enhanced animal welfare, improved milk quality, and increased operational efficiency make it a compelling investment for dairy farms committed to both ethical and sustainable practices. Its effective operation signifies a move towards a more humane and efficient approach to dairy farming, where animal well-being is not just a concern but a core operational principle.
4. Data Analytics
In the realm of modern dairy farming, Data Analytics emerges not as a mere add-on, but as the central nervous system, breathing life into operations and transforming raw data into actionable strategies. This becomes especially pertinent in the context of advanced systems, wherein the interplay between sensors, machinery, and animal physiology generates an unprecedented stream of information. Data Analytics, then, is the interpretive lens through which farmers can truly understand and optimize their operations.
-
Real-time Milk Quality Assessment
Imagine a scenario: truck after truck of milk departing the dairy farm, its quality unseen until reaching the processing plant. With Data Analytics integrated into this technology, this blind faith transforms into informed assurance. Sensors continually analyze milk composition during extraction, identifying potential contaminants, deviations in fat content, or indicators of mastitis. Should an anomaly surface, an immediate alert triggers, allowing for swift intervention and preventing contaminated milk from entering the supply chain. This proactive approach not only safeguards product quality but also mitigates potential financial losses and reputational damage.
-
Predictive Maintenance for Milking Equipment
The relentless operation of milking equipment subjects its components to wear and tear, raising the specter of unexpected breakdowns. In a traditional setting, such breakdowns lead to operational downtime, reduced productivity, and costly emergency repairs. However, when Data Analytics is implemented, the system monitors critical parameters such as motor temperatures, pump pressures, and vacuum levels, employing algorithms to detect subtle deviations from established baselines. The system predicts potential failures, providing ample time for scheduled maintenance and preventing catastrophic breakdowns. This predictive capability minimizes disruptions, ensuring continuous and efficient milking operations.
-
Individual Cow Performance Tracking
In the tapestry of the herd, each cow possesses a unique performance profile, influenced by genetics, nutrition, and health status. Traditional farming practices often treat the herd as a homogenous entity, overlooking individual variations that can significantly impact overall productivity. With Data Analytics, individual cow performance becomes transparent. The system tracks milk yield, somatic cell count, breeding cycles, and other key indicators for each animal, allowing farmers to identify high-performing cows deserving of optimized resources and underperforming cows requiring targeted interventions. This granular insight enables data-driven decisions regarding breeding strategies, nutritional adjustments, and veterinary care, leading to improved overall herd health and productivity.
-
Optimized Feeding Strategies
Feed costs constitute a substantial portion of dairy farm expenses, making efficient feed management crucial for profitability. Traditional feeding strategies often rely on generalized rations, failing to account for individual cow needs and variations in feed quality. Integrated Data Analytics allows for the precise matching of feed rations to individual cow requirements, taking into account milk production levels, body condition scores, and stage of lactation. By optimizing feed intake, this system minimizes waste, reduces feed costs, and ensures that each cow receives the nutrients necessary to achieve its full production potential. This translates to improved feed efficiency and a more sustainable and profitable dairy operation.
The confluence of these facets underscores a fundamental transformation in dairy farming. This, empowered by Data Analytics, transcends the limitations of traditional, intuition-based approaches. Instead, it embraces a data-driven paradigm where decisions are informed by real-time insights, optimized for individual needs, and geared towards continuous improvement. The system, therefore, stands not merely as a milking machine, but as a sophisticated information hub, propelling dairy farming into an era of unprecedented efficiency, sustainability, and profitability.
5. System Integration
The narrative of modern dairy farming is one of increasing complexity, where individual components must function in harmony to achieve optimal results. System Integration, in the context of sophisticated equipment such as this edition, is not an optional feature; it is the foundational principle upon which its effectiveness rests. The consequences of neglecting this integration can be severe. Picture a sprawling dairy operation investing heavily in advanced milking units but failing to connect them seamlessly with existing herd management software. The potential gains in efficiency and yield remain untapped, the flow of data fragmented, and the farmer left struggling to piece together a comprehensive picture of the operation. Without effective System Integration, the individual components, however sophisticated, remain isolated islands of technology.
The crucial importance of System Integration becomes evident when considering the diverse facets of a modern dairy farm. The milking unit, the feeding system, the health monitoring devices, and the environmental control systems all generate vast amounts of data. This data, in isolation, offers limited value. However, when integrated into a unified platform, it unlocks powerful insights. For instance, a sudden drop in milk production, flagged by the milking unit, can be correlated with feed consumption data to identify potential nutritional deficiencies. Or, a rise in somatic cell count, detected by the health monitoring system, can be linked to environmental conditions to pinpoint potential sources of infection. The ability to cross-reference and analyze data across multiple systems empowers farmers to make informed decisions, optimize resource allocation, and proactively address potential problems. This integration isn’t merely about connecting devices; it’s about creating a cohesive ecosystem where data flows freely, insights emerge, and the entire operation functions as a well-oiled machine.
In conclusion, System Integration is the linchpin of this systems effectiveness. It is the catalyst that transforms individual components into a unified, intelligent platform. While the initial investment in integration may seem daunting, the long-term benefits increased efficiency, improved animal health, and enhanced profitability far outweigh the costs. As dairy farming continues to evolve, the ability to seamlessly integrate diverse systems will become increasingly critical for success. Those who embrace this principle will be best positioned to thrive in the data-driven future of agriculture.
6. Hygiene Control
The specter of contamination haunts every stage of dairy production, a silent threat capable of undermining even the most sophisticated operations. In the context of this sophisticated milking apparatus, Hygiene Control transcends a simple checklist of cleaning procedures; it becomes an integrated philosophy, a meticulously engineered defense against the unseen enemy.
-
Automated Sanitation Cycles
Consider a scenario: a dairy farm operating around the clock, its milking units in constant use. The manual cleaning of these units between each milking session becomes a logistical nightmare, vulnerable to human error and inconsistent execution. This machine addresses this challenge with fully automated sanitation cycles. After each milking, the system initiates a sequence of cleaning, rinsing, and sanitizing processes, adhering to pre-programmed protocols and eliminating the risk of human variability. A malfunctioning automated cycle triggers an immediate alert, preventing contaminated milk from entering the system. This level of automated sanitation is simply unattainable in traditional milking setups.
-
Material Selection and Design
The insidious nature of bacteria demands more than surface-level cleaning. The very materials used in the construction of the milking equipment become critical determinants of hygiene. Smooth, non-porous surfaces, resistant to bacterial adhesion, are essential. This unit utilizes medical-grade stainless steel and specialized polymers, engineered for easy cleaning and minimal bacterial harborage. Consider the intricate design of the milk flow pathways. Sharp angles and crevices, common in older equipment, create breeding grounds for bacteria. This machine minimizes these dead spaces, facilitating thorough cleaning and preventing the accumulation of biofilms. Every aspect of the design, from the selection of materials to the configuration of components, is guided by the principles of hygiene.
-
Real-time Monitoring of Cleaning Effectiveness
Visual inspection alone cannot guarantee the effectiveness of cleaning procedures. Microscopic contaminants can persist, invisible to the naked eye. This machine incorporates sensors that monitor the effectiveness of the sanitation cycles, detecting residual milk proteins and bacterial activity. If the system detects inadequate cleaning, it automatically triggers a re-cleaning cycle, ensuring that the equipment meets stringent hygiene standards. Furthermore, the data generated by these sensors provides valuable insights into the performance of the cleaning protocols, allowing for continuous optimization and refinement. This real-time monitoring capability elevates Hygiene Control from a reactive process to a proactive strategy.
-
Sealed System Design
External contaminants can easily compromise the integrity of the milking process. Dust, insects, and airborne pathogens pose a constant threat. This apparatus is designed as a sealed system, minimizing exposure to the external environment. Air filtration systems remove airborne particles, preventing them from entering the milking chamber. Positive pressure within the system further reduces the risk of contamination. This sealed environment, combined with rigorous sanitation protocols, creates a sterile milking zone, safeguarding the quality and safety of the milk.
These facets, intertwined within the very fabric of this milking system, represent a paradigm shift in Hygiene Control. It transcends the realm of manual procedures and integrates into a proactive, automated, and data-driven strategy. Consider a small-scale dairy farm struggling to compete with larger operations. Through this sophisticated machinery, it gains access to a level of Hygiene Control previously unattainable, ensuring the safety and quality of its milk and bolstering its position in the market. It stands as a testament to the power of technology in safeguarding public health and elevating the standards of dairy production.
7. Durable Construction
In the unforgiving theater of dairy farming, machinery endures a relentless assault. Daily operation grinds on, exposing equipment to constant use, harsh chemicals, and the vagaries of the environment. It is within this context that Durable Construction ceases to be a mere design specification and emerges as a fundamental requirement for the survival and success of any system, especially for advanced systems. Without it, the promise of efficiency and productivity remains hollow, destined to be shattered by the inevitable reality of breakdowns and repairs. Durable Construction functions as the backbone, the unwavering foundation upon which the entire operation stands, ensuring that the machine remains operational, reliable, and capable of delivering consistent performance year after year. The system integrates premium materials, like reinforced stainless steel, to resist corrosion and wear from constant use and harsh cleaning agents.
Consider the plight of a dairy farmer who, lured by the promise of automation, invests in a system that ultimately proves to be fragile and unreliable. Frequent breakdowns disrupt milking schedules, reduce milk yield, and inflate maintenance costs, eroding the farmer’s profits and undermining their confidence in technology. Conversely, a system built with Durable Construction in mind offers a different experience entirely. Components withstand the rigors of daily use, minimizing downtime and ensuring a steady stream of high-quality milk. Imagine a scenario where a severe power surge threatens to cripple a dairy farm’s operations. A system, designed with robust electrical components and surge protection, weathers the storm unscathed, allowing the farmer to maintain uninterrupted milking schedules and prevent significant financial losses. This level of resilience is not merely a matter of convenience; it’s a matter of economic survival in an industry where margins are often razor thin.
Therefore, Durable Construction is not merely an attribute; it is the very essence of its reliability and longevity. By investing in this type of system, dairy farmers are not simply purchasing a piece of machinery; they are investing in the long-term sustainability of their operations. The long term value protects farms from unforeseen financial setbacks, offering a reliable partner to drive productivity and success.
8. Remote Monitoring
The sun dips below the horizon, casting long shadows across the expansive dairy farm. Once, the farm owner would be tethered to the milking parlor, the day’s final task demanding physical presence. Now, with the integration of this equipment and its remote monitoring capabilities, a different scene unfolds. Miles away, at a child’s soccer game, that same owner monitors the evening milking session via a tablet. Data streams in real-time: milk flow rates, temperature readings, and system diagnostics. A minor anomaly flags a slight decrease in vacuum pressure in one of the milking units. Without leaving the game, the owner contacts the on-site technician, who quickly identifies and resolves a minor clog, averting a potential disruption to the entire milking process. This is the promise of remote monitoring, transforming reactive problem-solving into proactive management, extending the reach and control of the farm owner beyond the physical confines of the farm.
The importance of remote monitoring as a component of it stems from the very nature of modern dairy farming a complex interplay of biology, mechanics, and economics. A sudden spike in somatic cell count in a particular cows milk, often an early indicator of mastitis, can be detected remotely. This allows for immediate intervention, preventing the infection from spreading and minimizing the need for antibiotics. The economic implications are significant reduced veterinary costs, minimized milk loss, and preservation of the herds overall health. Beyond individual animal health, remote monitoring provides a holistic view of the entire operation. Trends in milk production can be analyzed to optimize feeding strategies, identify potential equipment inefficiencies, and make informed decisions about breeding programs. The capacity to analyze this data remotely empowers farm owners to refine their practices, enhance productivity, and improve profitability, all without sacrificing their personal lives. Without remote monitoring, dairy farmers risk being chained to their farms, unable to respond effectively to unforeseen problems and missing out on valuable opportunities for optimization.
Remote monitoring within it is not without its challenges. The reliance on stable internet connectivity creates a vulnerability in rural areas where broadband access may be limited or unreliable. Cybersecurity concerns also loom large, demanding robust measures to protect sensitive farm data from unauthorized access. Despite these challenges, the benefits of remote monitoring far outweigh the risks. As technology continues to advance, and connectivity becomes more ubiquitous, remote monitoring will become an indispensable tool for dairy farmers seeking to thrive in an increasingly competitive and data-driven world. The story of the farm owner at the soccer game, effortlessly managing the milking process from afar, is not a futuristic fantasy; it is a present-day reality, a testament to the transformative power of remote monitoring in the realm of modern dairy farming.
Frequently Asked Questions
Consider this: a seasoned dairy farmer, steeped in tradition, approaches the prospect of integrating advanced technology with a healthy dose of skepticism. These frequently asked questions address the core concerns that often arise when considering such a significant investment.
Question 1: Can automated milking truly replicate the gentle touch of a skilled hand?
The essence of effective milking resides in minimizing animal stress. Its milking process incorporates sensors that detect individual cow variations, adjusting vacuum pressure and pulsation rates accordingly. This data-driven approach aims to achieve a level of consistency and gentleness often unattainable through manual methods, thus promoting udder health and milk yield.
Question 2: Is the system robust enough to withstand the daily rigors of a working dairy farm?
Durability is paramount in an environment characterized by constant use, harsh chemicals, and demanding conditions. The machinery is constructed with premium-grade stainless steel and reinforced components, meticulously engineered to withstand the rigors of daily operation and ensure long-term reliability. Thorough testing ensures that the system endures, providing years of dependable service.
Question 3: How complex is the transition from traditional milking methods to a fully automated system?
The transition necessitates comprehensive training and ongoing support. However, the system is designed with a user-friendly interface and intuitive controls, aiming to minimize the learning curve. Dedicated support teams provide on-site assistance and remote troubleshooting, guiding farmers through every step of the implementation process and ensuring a smooth and seamless transition.
Question 4: What measures are in place to safeguard the integrity of the milk supply?
Hygiene control is paramount. It incorporates automated sanitation cycles, medical-grade materials, and real-time monitoring systems to prevent contamination. The sealed system design minimizes exposure to external elements, and advanced sensors detect subtle anomalies, ensuring the highest standards of milk quality and safety.
Question 5: Is the system vulnerable to cyberattacks, and how is farm data protected?
Data security is of utmost importance. The system employs robust encryption protocols, multi-factor authentication, and regular security audits to protect sensitive farm data from unauthorized access. Data storage and transmission comply with stringent industry standards, ensuring the confidentiality and integrity of information.
Question 6: What is the return on investment, and how does it contribute to long-term profitability?
The return on investment stems from a multitude of factors, including increased milk yield, reduced labor costs, improved animal health, and enhanced operational efficiency. Data analytics provide valuable insights for optimizing feeding strategies, breeding programs, and resource allocation. This integrated approach drives long-term profitability and sustainability.
This technology signifies a paradigm shift in dairy farming, necessitating a commitment to continuous learning and adaptation. While the initial investment may seem significant, the long-term benefits increased efficiency, improved animal welfare, and enhanced profitability offer a compelling argument for its adoption.
The subsequent section will explore real-world case studies, illustrating the transformative impact of this technology on diverse dairy farming operations.
Tips for Maximizing Performance
Dairy farming, a profession steeped in tradition, now faces a stark reality: technology’s relentless march. The adoption of sophisticated systems presents not merely an upgrade but a fundamental shift in operational mindset. These tips offer guidance, derived from observing the successes and failures of those who have walked this path, aimed at harnessing its power effectively.
Tip 1: Embrace Data-Driven Decisions. The era of intuition-based farming is waning. Harness the data generated by the system. Track milk yield, somatic cell counts, and individual animal performance. A farmer, once relying on gut feeling, discovered a subtle drop in milk production in a specific sector of the herd. Data revealed a localized nutritional deficiency, swiftly corrected, averting a significant production loss.
Tip 2: Prioritize Preventative Maintenance. This system is not a self-healing entity. Regular maintenance, adherence to recommended schedules, and proactive identification of potential issues are paramount. A failure to heed this warning led one farm to a crippling breakdown during peak season, resulting in substantial financial repercussions. Learn from their misfortune.
Tip 3: Invest in Employee Training. The most advanced machinery is rendered useless without skilled operators. Invest in comprehensive training for personnel, focusing on system operation, troubleshooting, and data interpretation. A seemingly minor software glitch, left unaddressed due to inadequate training, cascaded into a major operational disruption, highlighting the criticality of human expertise.
Tip 4: Maintain Rigorous Hygiene Protocols. Contamination is the silent saboteur. Strictly adhere to recommended cleaning protocols, utilizing approved sanitizing agents. A lapse in hygiene, however brief, allowed bacterial growth to compromise an entire batch of milk, resulting in significant financial loss and reputational damage.
Tip 5: Optimize Milking Schedules. Tailor milking schedules to the individual needs of the herd. Avoid a one-size-fits-all approach. Data analysis revealed that modifying the milking schedule for a specific cohort of cows significantly increased milk production and reduced stress levels.
Tip 6: Ensure System Integration. The machinery functions best when seamlessly integrated with existing farm management systems. A failure to integrate led to data silos, hindering decision-making and reducing the systems overall effectiveness. Invest the time and resources to achieve seamless integration.
Tip 7: Develop a Cybersecurity Plan. In an interconnected world, data security is paramount. Implement robust cybersecurity measures to protect sensitive farm data from unauthorized access. A breach in security could compromise the entire operation, leading to financial loss and reputational damage. Treat cybersecurity with the seriousness it deserves.
These tips, gleaned from the experiences of others, serve as a compass guiding the journey towards optimized dairy farming. Embrace data, prioritize maintenance, invest in training, uphold hygiene, tailor schedules, integrate systems, and secure your data. The path to success lies in diligent application of these principles.
The following section will conclude this exploration, summarizing key takeaways and offering a perspective on the future of dairy farming.
Conclusion
The journey through the intricacies of the milker pro edition has revealed more than just a piece of machinery; it has exposed a paradigm shift in dairy farming. It stands as a testament to the power of data-driven decisions, precision engineering, and a commitment to animal welfare. Its features, from automated extraction to remote monitoring, are not mere technological enhancements, but cornerstones of a more efficient, sustainable, and ethical approach to dairy production. The long nights of manual labor, the guesswork of traditional methods, the anxieties of unforeseen breakdowns these are the challenges the milker pro edition seeks to mitigate, offering a path toward greater control and predictability in an increasingly complex industry.
The choice now rests with those who shape the future of dairy. To embrace the milker pro edition is to acknowledge the evolving landscape of agriculture and to commit to a future where technology serves not only productivity but also the well-being of animals and the sustainability of the environment. The stakes are high, the challenges are real, but the potential rewards are undeniable. The milker pro edition is not a destination but a starting pointa catalyst for innovation and a foundation for a thriving future for dairy farms across the globe. The decision remains: will the promise of progress be embraced, or will the industry cling to a past that can no longer sustain it? The answer will determine the very shape of dairy farming for generations to come.
